Emergency Lighting and Exit Sign Systems for Commercial Buildings
When the power goes out in an occupied building, the first thing people need is a clear way to see and a clear way out. Emergency lighting and exit signs do that job. They are easy to ignore on a normal day, which is exactly why they fail quietly: a dead battery, a burned-out lamp, or a sign blocked by new shelving.
This page explains what these systems include, how they are tested, and what to look for in your own facility. If you need work done, Rolwes Electric can help with emergency lighting installation and testing for commercial and industrial properties around Wentzville and St. Charles County.
What Emergency Lighting and Exit Signs Actually Do
These are two related systems with different jobs:
- Emergency lighting turns on automatically when normal power is lost. It lights hallways, stairways, exit paths, and open work areas so people can move safely.
- Exit signs mark the path out of the building and the final exit door. Most are illuminated and have their own backup power.
Both are life-safety equipment. They are separate from your everyday lighting, even when the fixtures look similar.
Types of Emergency Lighting Systems
The right setup depends on the size and use of the building.
Self-contained units: Each fixture has its own battery and charger. Common in offices, shops, and smaller buildings because they are simple to add and service.
Combination exit and emergency units: One fixture handles the exit sign and the emergency lamps. Useful where wall space or wiring is limited.
Remote-head fixtures: Lamp heads mounted away from the battery unit to light a specific area, such as a corridor or equipment aisle.
Central battery or inverter systems: One larger power source feeds many fixtures. Often used in larger buildings where centralized testing and maintenance make sense.
Generator-backed circuits: Some facilities power egress lighting from a standby generator, which adds requirements for transfer timing and testing.
Emergency Lighting Installation: What Goes Into It
Good installation is mostly planning. Fixtures placed in the wrong spot can leave dark gaps even when every unit works.
➞ Review the layout: Exit routes, stairwells, doors, corridors, and large open areas.
➞ Identify code requirements: Requirements depend on how the space is used and which codes your local authority has adopted.
➞ Select the equipment: Fixture type, battery capacity, and mounting that fit the space and ceiling conditions.
➞ Install and wire: Emergency fixtures are typically connected to an unswitched source of normal power so the unit can keep its battery charged and detect an outage.
➞ Verify coverage: Confirm the lights come on and that the path of egress is actually lit.
➞ Document the work: Keep records of what was installed and tested.
Because requirements vary by building type and jurisdiction, confirm what applies to your property with your local building department or fire marshal. We can help you work through it.
Emergency Lighting Testing: What to Expect
Testing is what keeps these systems dependable. National life-safety guidance generally calls for emergency lighting to run on backup power for about 90 minutes, and a common testing routine looks like this:
➤ Monthly: A short functional test, typically around 30 seconds, to confirm each fixture and exit sign switches to backup power.
➤ Annually: A full-duration test, typically 90 minutes, to confirm batteries can carry the load for the required time.
➤ Records: Dates, results, and repairs written down and kept on file.
Schedules and documentation rules can differ by jurisdiction and building type, so confirm the requirements that apply to you.
A written log is also useful during inspections and insurance reviews.
Signs Your System Needs Attention
You do not have to wait for a failed inspection. Watch for:
- Fixtures that do not light when tested
- Charging indicator lights that are off or flashing
- Batteries that are swollen, leaking, or several years old
- Exit signs that are dim, flickering, or partly out
- Signs or fixtures blocked by shelving, ductwork, or new partitions
- Recent remodeling or new equipment that changed walkways and exits
- Older fixtures with no testing records
If your building layout has changed since the lighting was installed, the system may no longer cover the actual exit path.
Upgrading to LED Emergency and Exit Lighting
Older exit signs and emergency heads often use incandescent or fluorescent lamps. LED versions typically draw less power, produce less heat, and last longer between lamp replacements. Many facilities upgrade when they are already replacing aging fixtures or batteries, since the labor overlaps. An upgrade also gives you a chance to correct placement and bring records up to date.
Who Needs This Work
The need shows up in almost any occupied commercial building, including:
- Offices and professional suites
- Retail and restaurant spaces
- Warehouses and light industrial facilities
- Schools, churches, and community buildings
- Tenant spaces after a buildout or remodel
Emergency Lighting Service Near Wentzville
Rolwes Electric is a commercial and industrial electrical contractor based in Wentzville, Missouri, serving facilities across St. Charles, Lincoln, and Warren Counties, including O’Fallon and St. Peters. Our team can look at your current emergency lighting and exit signs, explain what needs attention, and handle installation, repairs, or replacement.
Frequently Asked Questions
What is the difference between emergency lighting and exit signs?
Emergency lighting illuminates the space so people can move safely. Exit signs mark where the exits are. Both need backup power, and both should be tested.
How long should emergency lights stay on during a power outage?
National life-safety guidance generally calls for about 90 minutes of backup operation. Confirm the requirement for your building with your local authority.
How often should emergency lighting be tested?
A common routine is a brief monthly test and a full 90-minute test once a year, with written records. Local rules may add to this.
Can I replace the batteries myself?
Some units are designed for simple battery replacement, but wiring, fixture placement, and testing are best handled by a qualified electrician so the system works when needed.
Do I need to upgrade my emergency lighting after a remodel?
Often, yes. New walls, equipment, or changed exit paths can leave dark areas or block signs, so it is smart to have coverage reviewed after layout changes.
Can emergency lighting be added to an existing building?
Yes. Self-contained and combination units are commonly added to existing spaces without major construction.
Schedule an Emergency Lighting Check
Want to know if your exit signs and emergency lights are ready when you need them? Call Rolwes Electric at 314-249-5563 or request an estimate online.