Electrical Safety Audits & Site Surveys for Businesses in Wentzville, MO

At a glance: An electrical safety audit is a structured assessment of your building’s electrical system. It finds hazards, overloaded equipment, and code concerns, then gives you a clear, prioritized report so you can plan with confidence. Rolwes Electric performs audits and site surveys for commercial and industrial facilities in Wentzville and the surrounding area.

Most electrical problems don’t start as emergencies. They start as a loose connection, a crowded panel, or a circuit that has quietly outgrown its load. An audit finds these problems while you still have time to plan, budget, and schedule around them.

Rolwes Electric is a commercial and industrial electrical contractor based in Wentzville, MO. Our audits are about information first: what you have, what condition it’s in, and what deserves attention.

What is an electrical safety audit?

An electrical safety audit is a documented review of your electrical system by a qualified electrician. It looks at equipment, wiring, protection, labeling, and how the building is actually used. The goal is to answer three questions:

  1. Is the system safe today?
  2. Where are the risks?
  3. What should be addressed first?

 

A site survey is closely related. It maps and documents what is installed, which is useful for older buildings, new ownership, or expansion plans.

What we assess

Every building is different, so the scope is set with you. A typical audit may cover:

  • Service and main equipment: capacity, condition, and labeling
  • Panels and distribution: loading, organization, clearances, signs of heat or wear
  • Wiring and connections: damaged insulation, improper splices, loose terminations
  • Grounding and bonding: whether protection paths are in place and intact
  • Protective devices: breakers, GFCI and AFCI protection where applicable
  • Equipment circuits: whether machinery, chargers, and shop equipment are properly supplied
  • Lighting and emergency lighting: condition and coverage
  • Cords and temporary wiring: extension cord and power strip use
  • Work areas and access: panel clearances, storage near equipment, signage
  • Documentation: panel schedules, one-line diagrams, and labeling
electrical safety audit for businesses

Where it makes sense, we can add tools such as [thermal imaging] to find heat that can’t be seen, or [power analysis] to look at power quality and loading.

What you receive

The value of an audit is in the report. You can expect:

  • A written summary of what was reviewed and what was found
  • Findings sorted by priority, so urgent safety items are separate from long-term items
  • Photos and locations so issues are easy to find and verify
  • Clear recommendations in plain language
  • A basis for budgeting, so upgrades can be planned instead of rushed

 

The report is yours to keep and act on with any qualified contractor. 

When a business should schedule an audit

  • You’ve bought, leased, or are moving into a building
  • The building is older, or the wiring history is unknown
  • You’ve added equipment, racking, or machinery
  • You’re seeing tripping breakers, flickering lights, or warm panels
  • You’re planning a renovation or expansion
  • Your insurer or a lender is asking for documentation
  • It has been several years since the system was last reviewed
  • You want a baseline before starting a maintenance program

 

How the process works

1. Scoping call

We learn about your building, your operations, and your concerns to understand your specific needs.

2. On-site survey

A qualified electrician walks the facility and examines equipment, working around your operating hours where possible.

3. Documentation

We record conditions, take photos, and note the details needed for the report and future reference.

4. Analysis and prioritization

Findings are ranked by safety risk and urgency to guide necessary repairs and maintenance planning.

5. Report and walkthrough

We deliver the written report and go over it with you so every item is clear and easy to understand.

6. Next steps, if you want them

 If you choose to act on the findings, we can help with, upgrades, or an ongoing plan. That part is your decision.

Audit, inspection, and maintenance: what’s the difference?

ServicePurposeResult
Safety audit / site surveyAssess and document the whole systemA prioritized report
InspectionVerify specific work or equipment meets requirementsPass/fail or a list of corrections
Preventive maintenanceKeep equipment in good condition over timeScheduled service and testing

Most businesses benefit from starting with an audit, which shows where maintenance and upgrades should focus.

Standards and codes

Our assessments reference the National Electrical Code and applicable local requirements, and take into account recognized industry practices for electrical maintenance and safety, such as those published by NFPA. Your insurer, local authority, and industry may set additional requirements, and we’ll note them where they apply.

Serving Wentzville and the surrounding area

We provide electrical safety audits and site surveys for commercial and industrial customers in Wentzville and across Lincoln County, Warren County, O’Fallon, and St. Peters.

Frequently Asked Questions

It is a structured review of a building’s electrical system by a qualified electrician. It identifies hazards and concerns, ranks them by priority, and gives the owner a written report.

It depends on the size and complexity of the facility. We can give an estimate after learning about your building.

We plan the survey around your schedule. Some areas, such as panels and equipment rooms, need access, and we coordinate that with you in advance.

There’s no single answer. It depends on building age, use, equipment, and insurer or code requirements. Many businesses review their system periodically and after major changes.

An audit assesses the overall system and prioritizes findings. An inspection typically verifies specific work or equipment against requirements.

Yes. We work with commercial and industrial facilities, including warehouses, shops, offices, and manufacturing spaces.

Know where your electrical system stands

If you’re unsure about the condition of your building’s electrical system, an audit gives you answers. Call 314-249-5563 or request an electrical safety audit and talk with Rolwes Electric.

Rolwes Electric
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.